Philip Burrows

Abstract:

Diagnosing plasma conditions can give great advantages in optimizing plasma wakefield accelerator experiments. One possible method is that of photon acceleration. By propagating a laser probe pulse through a plasma wakefield and extracting the imposed frequency modulation, one can obtain an image of the density modulation of the wakefield. In order to diagnose the wakefield parameters at a chosen point in the plasma, the probe pulse crosses the plasma at oblique angles relative to the wakefield. In this paper, mathematical expressions relating the frequency modulation of the laser pulse and the wakefield density profile of the plasma for oblique crossing angles are derived. Multidimensional particle-in-cell simulation results presented in this paper confirm that the frequency modulation profiles and the density modulation profiles agree to within 10%. Limitations to the accuracy of the measurement are discussed in this paper. This technique opens new possibilities to quantitatively diagnose the plasma wakefield density at known positions within the plasma column.

Abstract:

The efforts during the second half of 2014 towards nanometric beam position measurement and stabilization at the Interaction Point (IP) section of the Accelerator Test Facility (ATF) at KEK are presented. Recent improvements to the beam position monitor (BPM) data analysis and processing electronics, as well as the installation of a new set of C-Band BPMs, are reviewed.

Abstract:

A low-latency, sub-micron resolution stripline beam position monitoring (BPM) system has been developed and tested with beam at the KEK Accelerator Test Facility (ATF2), where it has been used as part of a beam stabilisation system. The fast analogue front-end signal processor is based on a single-stage RF down-mixer and a position resolution below 400 nm has been demonstrated for beam intensities of 1 nC, with single-pass beam. The BPM position data are digitised by fast ADCs on an FPGA-based digital feedback controller, which is used to drive either a pair of kickers local to the BPMs and nominally orthogonal in phase, in closed-loop feedback mode, or a downstream kicker in the ATF2 final focus region, in feedforward mode. The beam jitter is measured downstream of the final focus system with high resolution, low-Q, cavity BPMs, and the relative performance of both systems in stabilising the beam is compared.

Abstract:

A low-latency, intra-train, beam feedback system utilising a cavity beam position monitor (BPM) has been developed and tested at the final focus of the Accelerator Test Facility (ATF2) at KEK. A low-Q cavity BPM was utilised with custom signal processing electronics, designed for low latency and optimal position resolution, to provide an input beam position signal to the feedback system. A custom stripline kicker and power amplifier, and an FPGA-based digital feedback board, were used to provide beam correction and feedback control, respectively. The system was deployed in single-pass, multi-bunch mode with the aim of demonstrating intratrain beam stabilisation on electron bunches of charge ∼1 nC separated in time by c. 280 ns. The system has been used to demonstrate beam stabilisation to below the 100 nm level. Results of the latest beam tests, aimed at even higher performance, will be presented.

Abstract:

Six UK institutes are engaged in a collaborative R&D programme with CERN aimed at demonstrating key aspects of technology feasibility for the Compact Linear Collider (CLIC). We give an overview and status of: 1) Drive-beam components: quadrupole magnets and the beam phase feed-forward prototype. 2) Beam instrumentation: stripline and cavity beam position monitors, an electro-optical longitudinal bunch profile monitor, and laserwire and diffraction and transition radiation monitors for transverse beam-size determination. 3) Beam delivery system and machinedetector interface design, including beam feedback/control systems and crab cavity design and control. 4) RF structure design. In each case we report on the status of prototype systems and performance tests with beam at the CTF3, ATF2 and CESRTA test facilities, including plans for future experiments.