Optimisation of TES design for the CRESST experiment
IEEE Transactions on Applied Superconductivity Institute of Electrical and Electronics Engineers (IEEE) PP:99 (2026) 1-7
Abstract:
The CRESST experiment aims at the direct detection of sub-GeV dark matter particles via elastic scattering off nuclei in different target crystals at cryogenic temperatures. The advancement in W-TES sensors allowed the CRESST detectors to reach energy thresholds of 10$\,$eV and lower, opening the way to the exploration of dark matter masses as low as $\sim 70\,$MeV/c². This work presents optimisation studies of W-TESs aimed at further improving the signal-to-noise ratio and overall detector performance. In particular, we investigate the thickness, dimensions and material composition of phonon collectors and assess their impact on detector response. The results demonstrate a significant performance enhancement and establish new benchmarks for the sensors used within CRESST.Study of few-electron backgrounds in the LUX-ZEPLIN detector
Physical Review D American Physical Society (APS) 113:7 (2026) 072018
Abstract:
The LUX-ZEPLIN (LZ) experiment aims to detect rare interactions between dark matter particles and xenon. Although the detector is designed to be the most sensitive to GeV/c2–TeV/c2 weakly interacting massive particles (WIMPs), it is also capable of measuring low-energy ionization signals down to a single electron that may be produced by scatters of sub-GeV/c2 dark matter. The major challenge in exploiting this sensitivity is to understand and suppress the ionization background in the few-electron regime. We report a characterization of the delayed electron backgrounds following energy depositions in the LZ detector under different detector conditions. In addition, we quantify the probability for photons to be emitted in coincidence with electron emission from the high voltage grids. We then demonstrate that spontaneous grid electron emission can be identified and rejected with a high efficiency using a coincident photon tag, which provides a tool to improve the sensitivity of future dark matter searches.Study of few-electron backgrounds in the LUX-ZEPLIN detector
(2026)
Direct in-chamber radon-220 (thoron) emanation measurements for rare-event physics experiments
Journal of Instrumentation 21:3 (2026)
Abstract:
Measuring radon emanation from detector materials is a key method for controlling radon, a significant background in rare-event physics experiments. Methods for measuring radon emanation are well-established but have predominantly focused on the222Rn isotope, the dominant radon isotope for these backgrounds. However, measurements of220Rn (thoron), the second most abundant radon isotope, remain relatively unexplored.220Rn emanation measurements are challenging because the220Rn must be transferred from the emanation chamber to the active detector within its short 55 s half-life. In this study, a direct in-chamber approach for measuring220Rn emanation is presented in which the sample is placed directly within the active detector chamber, thereby minimising losses during transfer. The method was demonstrated with a DURRIDGE RAD8 electrostatic radon detector, which measured220Rn emanation from low-activity thoriated rods with an activity of 76 ± 20 mBq. Compared with a conventional flowthrough220Rn emanation setup, the in-chamber method increased sensitivity by a factor of 3. Using helium as the carrier gas provided a further sensitivity increase, giving an overall sensitivity gain of ∼ 5. These results indicate that in-chamber220Rn emanation measurements provide an effective tool for low-background experiments and have the potential to accelerate radon studies by exploiting the shorter half-life of220Rn.Construction and characterisation of the DarkSide-20k veto silicon photo-multiplier tiles
European Physical Journal C Springer Nature 86:9 (2026) 1089