Dr. Boon Kok Tan

Abstract:

Context. The use of large-format focal plane imaging arrays employing multiple feed horns is becoming increasingly important for the next generation of single dish sub-mm telescopes and cosmology experiments. Such receivers are being commissioned on both general purpose, common user telescopes and telescopes specifically designed for mapping intensity and polarisation anisotropies in the cosmic microwave background (CMB). Telescopes are currently being constructed to map the CMB polarisation that employ hundreds of feeds and the cost of manufacturing these feeds has become a significant fraction of the total cost of the telescope. Aims. We have developed and manufactured low-cost easy-to-machine smooth-walled horns that have a performance comparable to the more traditional corrugated feed horns that are often used in focal plane arrays. Our horns are much easier to fabricate than corrugated horns enabling the rapid construction of arrays with a large number of horns at a very low cost. Methods. Our smooth walled horns use multiple changes in flare angle to excite higher order waveguide modes. They are designed using a genetic algorithm to optimise the positions and magnitudes of these flare angle discontinuities. We have developed a fully parallelised software suite for the optimisation of these horns. We have manufactured prototype horns by traditional electroforming and also by a new direct drilling technique and we have measured their beam patterns using a far-field antenna test range at 230 GHz. Results. We present simulated and measured far-field beam patterns for one of our horn designs. They exhibit low sidelobe levels, good beam circularity and low cross-polarisation levels over a fractional bandwidth of 20%. These results offer experimental confirmation of our design technique, allowing us to proceed confidently in the optimisation of horns with a wider operational bandwidth. The results also show that the new manufacturing technique using drilling is successful, enabling the fabrication of large format arrays by repeatedly drilling into a single aluminium plate. This will enable the construction of focal plane arrays at a very low cost per horn. Conclusions. We have developed a new type of high performance feed horn that is fast and easy to fabricate. Having demonstrated the efficacy of our horn designs experimentally, we are building and testing a prototype focal plane array of 37 hexagonally close packed horns. This prototype array will be an important step towards building a complete CMB mapping receiver using these feed horns. © 2011 ESO.

Abstract:

We present a novel design and the measured performance for a superconductor-insulator-superconductor (SIS) mixer, operating near the superconducting gap of niobium (Nb), in the frequency range of 600-700 GHz. A key feature of the mixer design is the employment of a unilateral finline taper to provide smooth transition from the high-impedance waveguide mode to the low-impedance of planar circuits suitable for the operation of SIS tunnel junction. This geometry of the transition can be electromagnetically modelled and optimised to give a short mixer chip with wide RF bandwidth. The finline taper and all the superconducting transmission lines are integrated on-chip and deposited on a 60 μm thick quartz substrate. This results in an extremely simple mixer block design, comprising a feed horn and a straight waveguide section; no backshort or any mechanical tuning structure is needed. In this paper, we describe the design of the mixer chip, including full electromagnetic simulations of the passive circuits, combined with the heterodyne mixer gain and noise temperature predictions.We have tested the mixer performance from 595 GHz to 702 GHz and measured best receiver noise temperature of 145 K at 600 GHz, corrected for a beam splitter of 75 μm thickness. The need for a thick beam splitter was caused by the lack of sufficient power from the local oscillator (LO) which was optimised between 630-720 GHz and because our mixer was tuned low as a result of larger than designed tunnel junction. Nevertheless, our investigation has demonstrated that superconducting finline mixers work well at high frequencies and have several advantages over other designs, in particular simple mixer block and large substrate for integration of planar circuits.

Abstract:

An analysis of large-area CO J = 3-2 maps from the James Clerk Maxwell Telescope for 12 nearby spiral galaxies reveals low velocity dispersions in the molecular component of the interstellar medium. The three lowest luminosity galaxies show a relatively flat velocity dispersion as a function of radius while the remaining nine galaxies show a central peak with a radial fall-off within 0.2-0.4r25. Correcting for the average contribution due to the internal velocity dispersions of a population of giant molecular clouds, the average cloud-cloud velocity dispersion across the galactic discs is 6.1 ± 1.0 kms-1 (standard deviation of 2.9 kms-1), in reasonable agreement with previous measurements for the Galaxy and M33. The cloud-cloud velocity dispersion derived from the CO data is on average two times smaller than the HI velocity dispersion measured in the same galaxies. The low cloud-cloud velocity dispersion implies that the molecular gas is the critical component determining the stability of the galactic disc against gravitational collapse, especially in those regions of the disc which are H2 dominated. The cloud-cloud velocity dispersion shows a significant positivecorrelation with both the far-infrared luminosity, which traces the star formation activity, and the K-band absolute magnitude, which traces the total stellar mass. For three galaxies in the Virgo cluster, smoothing the data to a resolution of 4.5 kpc (to match the typical resolution of high-redshift CO observations) increases the measured velocity dispersion by roughly a factor of 2, comparable to the dispersion measured recently in a normal galaxy at z = 1. This comparison suggests that the mass and star formation rate surface densities may be similar in galaxies from z = 0 to 1 and that the high star formation rates seen at z = 1 may be partly due to the presence of physically larger molecular gas discs. © 2010 The Authors. Journal compilation © 2010 RAS.

Abstract:

In previous work, we have described novel smoothwalled multiple flare-angle horns designed using a genetic algorithm. A key feature of these horns is that they can be manufactured very rapidly and cheaply in large numbers, by repeated direct drilling into a single plate of aluminium using a shaped machine tool. The rapid manufacturing technique will enable the construction of very low cost focal-plane arrays, offering an alternative to conventional electroformed corrugated horn arrays. In order to experimentally demonstrate the new technology, we constructed a 230 GHz focal-plane array comprising 37 smooth-walled horns fabricated by direct drilling. We present the measured beam patterns for a large sample of these horns across the array, demonstrating the suitability of our manufacturing techniques for large format arrays. We have measured the cross coupling between adjacent feeds and have shown that it is negligible. We also present high quality beam patterns measured for a much smaller 700 GHz horn, showing the promise of extending this technology to THz frequencies.