Cosmology

Abstract:

We have carried out a concept study for a wide-field monolithic integral field unit (IFU) spectrograph for extremely large telescopes (ELTs). We target in this paper the technological challenges that have to be faced in order to build such an instrument, focusing on the adaptive optics (AO) requirements, the image slicer technology, and the detectors status. We also address the main science drivers, together with the concept design and the expected performance applied to the European-ELT (E-ELT) case. A monolithic wide-field spectrograph provides a continuous field of view (FOV) separated by a field splitter in several subfields, each of them feeding a module featuring an image slicer, a collimator and a spectrograph. The use of image slicers provides 3D spectrographic images of the complete FOV, allowing for detection and study of sources without need of targeting them, a very useful property especially for the deep observation of faint high-redshift objects, whose density on the sky is expected to be quite high. In light of this discussion, we suggest the advantages of using shorter wavelengths and its implication in both the scientific program and the budget. © 2008. The Astronomical Society of the Pacific. All rights reserved.

Abstract:

We describe the objectives, design and predicted performance of Clover, which is a ground-based experiment to measure the faint ``B-mode'' polarisation pattern in the cosmic microwave background (CMB). To achieve this goal, clover will make polarimetric observations of approximately 1000 deg^2 of the sky in spectral bands centred on 97, 150 and 225 GHz. The observations will be made with a two-mirror compact range antenna fed by profiled corrugated horns. The telescope beam sizes for each band are 7.5, 5.5 and 5.5 arcmin, respectively. The polarisation of the sky will be measured with a rotating half-wave plate and stationary analyser, which will be an orthomode transducer. The sky coverage combined with the angular resolution will allow us to measure the angular power spectra between 20 < l < 1000. Each frequency band will employ 192 single polarisation, photon noise limited TES bolometers cooled to 100 mK. The background-limited sensitivity of these detector arrays will allow us to constrain the tensor-to-scalar ratio to 0.026 at 3sigma, assuming any polarised foreground signals can be subtracted with minimal degradation to the 150 GHz sensitivity. Systematic errors will be mitigated by modulating the polarisation of the sky signals with the rotating half-wave plate, fast azimuth scans and periodic telescope rotations about its boresight. The three spectral bands will be divided into two separate but nearly identical instruments - one for 97 GHz and another for 150 and 225 GHz. The two instruments will be sited on identical three-axis mounts in the Atacama Desert in Chile near Pampa la Bola. Observations are expected to begin in late 2009.

Abstract:

We have developed a semi-empirical simulation of the extragalactic radio continuum sky suitable for aiding the design of next generation radio interferometers such as the Square Kilometre Array (SKA). The emphasis is on modelling the large-scale cosmological distribution of radio sources rather than the internal details of individual galaxies. Here we provide a description of the simulation to accompany the online release of a catalogue of 320 million simulated radio sources. The simulation covers 20x20 deg^2 - a plausible upper limit to the instantaneous field of view attainable with future (e.g. SKA) aperture array technologies - out to redshift z=20, and down to flux density limits of 10 nJy at 151, 610 MHz, 1.4, 4.86 and 18 GHz. Five distinct source types are included: radio-quiet AGN, radio-loud AGN of the FRI and FRII structural classes, and star-forming galaxies, the latter split into populations of quiescent and starbursting galaxies. In our semi-empirical approach, the simulated sources are drawn from observed (or extrapolated) luminosity functions and grafted onto an underlying dark matter density field with biases which reflect their measured large-scale clustering. A numerical Press-Schechter-style filtering of the density field is used to identify and populate clusters of galaxies. Radio source structures are built from point source and elliptical sub-components, and for FRI and FRII sources an orientation-based unification and beaming model is used to partition flux between the core and extended lobes and hotspots. The simulation output can be post-processed to achieve more complete agreement with observational data in the years ahead, with the aim of using these 'idealised skies' in telescope simulators to optimise the design of the SKA itself (abridged).