Space instrumentation

Abstract:

Understanding how the surfaces of airless planetary bodies—such as the Moon—scatter visible light enables constraints to be placed on their surface properties and top boundary layer inputs to be set within thermal models. Remote sensing instruments—such as Diviner onboard the Lunar Reconnaissance Orbiter—measure thermal emission and visible light scattering functions across visible (∼0.38–0.7 µm) to thermal infrared (TIR) wavelengths (∼0.7–350 μm). To provide ground support measurements for such instruments, the Oxford Space Environment Goniometer (OSEG) was built. Initially, the OSEG focused on measuring TIR directional emissivity functions for regolith and regolith simulant samples in a simulated space environment, but it has recently been modified to measure visible wavelength Bidirectional Reflectance Distribution Functions (BRDFs) of samples in ambient conditions. Laboratory-measured BRDFs can be used (1) to test and to help interpret models—such as the Hapke photometric model—and (2) as visible scattering function inputs for thermal models. This paper describes the modifications to and initial calibration measurements taken by the Visible Oxford Space Environment Goniometer with a 532 nm laser, and details how this setup can be used to measure BRDFs of regolith and regolith simulant samples of airless planetary bodies.

Abstract:

A major quest in Mars' exploration has been the hunt for atmospheric gases, potentially unveiling ongoing activity of geophysical or biological origin. Here, we report the first detection of a halogen gas, HCl, which could, in theory, originate from contemporary volcanic degassing or chlorine released from gas-solid reactions. Our detections made at ~3.2 to 3.8 μm with the Atmospheric Chemistry Suite and confirmed with Nadir and Occultation for Mars Discovery instruments onboard the ExoMars Trace Gas Orbiter, reveal widely distributed HCl in the 1- to 4-ppbv range, 20 times greater than previously reported upper limits. HCl increased during the 2018 global dust storm and declined soon after its end, pointing to the exchange between the dust and the atmosphere. Understanding the origin and variability of HCl shall constitute a major advance in our appraisal of martian geo- and photochemistry.

Abstract:

We analyze two sets of observations of Dione's co-orbital satellite Helene taken by Cassini's Composite Infrared Spectrometer (CIRS). The first observation was a CIRS FP3 (600 to 1100 cm−1, 9.1 to 16.7 μm) stare of Helene's trailing hemisphere, where two of the ten FP3 pixels were filled. The daytime surface temperatures derived from these observations were 83.3 ± 0.9 K and 88.8 ± 0.8 K at local times 223° to 288° and 180° to 238° respectively. When these temperatures were compared to a 1-D thermophysical model only albedos between 0.25 and 0.70 were able to fit the data, with a mean and standard deviation of 0.43 ± 0.12. All thermal inertias tested between 1 and 2000 J m−2 K−1 s-1/2 could fit the data (i.e. thermal inertia was not constrained). The second observation analyzed was a FP3 and FP4 (1100 to 1400 cm−1, 7.1 to 9.1 μm) scan of Helene's leading hemisphere. Temperatures between 77 and 89 K were observed with FP3, with a typical error between 5 and 10 K. The surface temperatures derived from FP4 were higher, between 98 and 106 K, but with much larger errors (between 10 and 30 K) and thus the FP3- and FP4-derived temperature largely agree within their uncertainty. Dione's disk-integrated bolometric Bond albedos have been found to be between 0.63 ± 0.15 (Howett et al. 2010) and 0.44 ± 0.13 (Howett et al. 2014). Thus Helene may be darker than Dione, which is the opposite of the trend found at shorter wavelengths (c.f. Hedman et al. 2020; Royer et al., 2021). However few conclusions can be drawn since the albedos of Dione and Helene agree within their uncertainty.