Moritz Riede

Abstract:

We present the material 2,3,10,11-tetrabutyl-1,4,9,12-tetraphenyl- diindeno[1,2,3-cd:1′,2′,3′-lm] perylene (Bu4-Ph4-DIP) as alternative green donor for bulk heterojunction small molecule organic solar cells (SMOSC). It is shown that Bu4-Ph4-DIP exhibits suitable absorption characteristics to be a potential material to fill the absorption gap between the commonly used standard absorbers ZnPc and C60. Devices with bulk heterojunctions of Bu4-Ph4-DIP:C60 display very high open circuit voltages of 0.99 V, high fill factors of up to 57%, and experiments yield promising efficiencies of η>2%. Such green-blue absorbing SMOSC are characterized by current voltage and external quantum efficiency measurements, and material properties are studied. It is shown that the devices are responsive to substrate heating, and that different donoracceptor mixing ratios can increase device performance. Possible influences of mixing ratio and heating on device morphology and electrical properties are discussed.

Abstract:

The performance of transparent metal top contacts in organic solar cells can strongly be improved by employing surfactant layers. We use scanning electron microscopy to investigate the change in morphology upon insertion of an Al surfactant layer between 4,7-diphenyl-1,10-phenanthroline (BPhen) and a silver top contact. UV photoelectron spectroscopy measurements show the changes in energetic alignments at different steps of the organic/metal interface formation. Furthermore, using X-ray photoelectron spectroscopy depth profiling, we compare the differing intermixing processes happening within the two samples. Thereby, we can show that Al binds to BPhen molecules, acting as surfactant for subsequently deposited Ag layers, while Ag without any Al surfactant layer penetrates into and intermixes with the BPhen layer. © 2010 Elsevier B.V. All rights reserved.

Abstract:

A large number of flexible polymer solar modules comprising 16 serially connected individual cells was prepared at the experimental workshop at Risø DTU. The photoactive layer was prepared from several varieties of P3HT (Merck, Plextronics, BASF and Risø DTU) and two varieties of ZnO (nanoparticulate, thin film) were employed as electron transport layers. The devices were all tested at Risø DTU and the functional devices were subjected to an inter-laboratory study involving the performance and the stability of modules over time in the dark, under light soaking and outdoor conditions. 24 laboratories from 10 countries and across four different continents were involved in the studies. The reported results allowed for analysis of the variability between different groups in performing lifetime studies as well as performing a comparison of different testing procedures. These studies constitute the first steps toward establishing standard procedures for an OPV lifetime characterization. © 2011 Elsevier B.V. All rights reserved.

Abstract:

Procedures for testing organic solar cell devices and modules with respect to stability and operational lifetime are described. The descriptions represent a consensus of the discussion and conclusions reached during the first 3 years of the international summit on OPV stability (ISOS). The procedures include directions for shelf life testing, outdoor testing, laboratory weathering testing and thermal cycling testing, as well as guidelines for reporting data. These procedures are not meant to be qualification tests, but rather generally agreed test conditions and practices to allow ready comparison between laboratories and to help improving the reliability of reported values. Failure mechanisms and detailed degradation mechanisms are not covered in this report. © 2011 Elsevier B.V. All rights reserved.

Abstract:

We study the morphology and optical properties of vacuum deposited films of the α-ω-bis-(dicyanovinylen)-sexithiophene, comprising four butyl side chains DCV6T-Bu(1,2,5,6) (DCV6T-Bu). An absorption band showing vibronic substructure indicates ordered molecular arrangement in the solid state. The room temperature (RT) self-organization is confirmed by X-ray diffraction (XRD). For films grown on heated substrates, XRD analysis and atomic force microscopy display increased crystallinity with larger domain size. In correlation to the XRD data, with increasing substrate temperature the absorption of the heated films becomes more structured and continuously shifts to longer wavelengths. Further, the hole mobility in DCV6T-Bu/C60 planar heterojunction (PHJ) devices, utilizing DCV6T-Bu films grown at RT and elevated substrate temperature is investigated using the charge extraction by linearly increasing voltage method. The derived values of the activation energy are consistent with the corresponding DCV6T-Bu film morphology. However, the charge carrier mobility does not increase with improving molecular order, as is evident by the obtained mobility values of 1.0 × 10-6 cm2/V s for the RT and 3.1 × 10-7 cm2/V s for the heated device, respectively. Finally, DCV6T-Bu/C60 PHJ solar cells consisting of absorber layers deposited on heated and unheated substrates are compared. © 2011 Elsevier B.V. All rights reserved.