Photovoltaic & Optoelectronic Device Group

Abstract:

Developing an efficient electron transport layer (ETL) through structural modification is essential to produce high-performance perovskite solar cell (PSC) devices. Specifically, the ETL should exhibit low defects, high optical transparency, and charge selectivity for ideal electron transport. Herein, we demonstrate (i) the low-temperature fabrication of tin oxide (SnO2) ETLs with a bilayer structure, and (ii) inkjet-printing of triple-cation perovskite films. Through the combined use of spin-coating and spray deposition, the optimized SnO2-bilayer ETL shows a nano-granule-textured surface, noticeably fewer defects, and a cascade conduction band position with the inkjet-printed perovskite film. The champion PSC device, based on the SnO2-bilayer ETL and inkjet-printed perovskite film, recorded an outstanding power conversion efficiency (PCE) of ∼16.9%, which is significantly higher than the device based on the conventional SnO2 ETL (PCE ∼14.8%). The improved photovoltaic performance of the SnO2-bilayer-based device arises mainly from more efficient charge transport and suppressed recombination at the ETL/perovskite interface. The SnO2-bilayer ETL and inkjet-printed perovskite films demonstrated herein can be potentially used for large-scale manufacturing of photovoltaic modules.

Abstract:

Metal halide perovskite (MHP) semiconductors have driven a revolution in optoelectronic technologies over the last decade, in particular for high-efficiency photovoltaic applications. Low-dimensional MHPs presenting electronic confinement have promising additional prospects in light emission and quantum technologies. However, the optimisation of such applications requires a comprehensive understanding of the nature of charge carriers and their transport mechanisms. This study employs a combination of ultrafast optical and terahertz spectroscopy to investigate phonon energies, charge-carrier mobilities, and exciton formation in 2D (PEA)₂PbI₄ and (BA)₂PbI₄ (where PEA is phenylethylammonium and BA is butylammonium). Temperature-dependent measurements of free charge-carrier mobilities reveal band transport in these strongly confined semiconductors, with surprisingly high in-plane mobilities. Enhanced charge-phonon coupling is shown to reduce charge-carrier mobilities in (BA)₂PbI₄ with respect to (PEA)₂PbI₄. Exciton and free charge-carrier dynamics are disentangled by simultaneous monitoring of transient absorption and THz photoconductivity. A sustained free charge-carrier population is observed, surpassing the Saha equation predictions even at low temperature. These findings provide new insights into the temperature-dependent interplay of exciton and free-carrier populations in 2D MHPs. Furthermore, such sustained free charge-carrier population and high mobilities demonstrate the potential of these semiconductors for applications such as solar cells, transistors, and electrically driven light sources.

Abstract:

Formamidinium lead triiodide (FAPbI₃) is the leading candidate for single-junction metal–halide perovskite photovoltaics, despite the metastability of this phase. To enhance its ambient-phase stability and produce world-record photovoltaic efficiencies, methylenediammonium dichloride (MDACl₂) has been used as an additive in FAPbI₃. MDA²⁺ has been reported as incorporated into the perovskite lattice alongside Cl^–. However, the precise function and role of MDA²⁺ remain uncertain. Here, we grow FAPbI₃ single crystals from a solution containing MDACl₂ (FAPbI₃-M). We demonstrate that FAPbI₃-M crystals are stable against transformation to the photoinactive δ-phase for more than one year under ambient conditions. Critically, we reveal that MDA²⁺ is not the direct cause of the enhanced material stability. Instead, MDA²⁺ degrades rapidly to produce ammonium and methaniminium, which subsequently oligomerizes to yield hexamethylenetetramine (HMTA). FAPbI₃ crystals grown from a solution containing HMTA (FAPbI₃-H) replicate the enhanced α-phase stability of FAPbI₃-M. However, we further determine that HMTA is unstable in the perovskite precursor solution, where reaction with FA⁺ is possible, leading instead to the formation of tetrahydrotriazinium (THTZ-H⁺). By a combination of liquid- and solid-state NMR techniques, we show that THTZ-H⁺ is selectively incorporated into the bulk of both FAPbI₃-M and FAPbI₃-H at ∼0.5 mol % and infer that this addition is responsible for the improved α-phase stability.