Mu3e

Abstract:

The Detector Safety System is the last line of defence to protect the ATLAS detector against abnormal and potentially even unforeseen situations. It is designed to return the detector to a safe state based on predefined actions triggered by alarms which are triggered on their part by specific sets of conditions. Every alarm whether it results in an action taken or not is followed up by the operations team that assesses the criticality, takes countermeasures and identifies the point of failure. From experience abnormal situations can result either from faults or from side effects of planned interventions which were either not properly identified despite the mandatory planning and review or where a mistake during execution occurred. In many cases there are multiple interventions ongoing simultaneously in order to profit from shutdown periods. The rapid analysis of alarms while the incident is ongoing is often complicated due to the complexity of the ATLAS detector and its infrastructure and the large number of responsible groups and experts. A new Alarm Helper tool was designed to assist the operation team, particularly the operator in the control room responsible for infrastructure and safety (SLIMOS – Shift Leader in Matters of Safety), by providing real-time information about ongoing interventions and the possible related causes of failure. The new tool will combine historical events, documentation, and limited knowledge about ongoing interventions. It extends the Expert System which visualizes and simulates infrastructure inter-dependencies and allows to trace faults or alarms to a list of potential points of failure. The new tool also proposes which experts should be contacted in the particular circumstances.

Abstract:

A search for R-parity-violating supersymmetry in final states with high jet multiplicity is presented. The search uses 140 fb−1 of proton-proton collision data at s = 13 TeV collected by the ATLAS experiment during Run 2 of the Large Hadron Collider. The results are interpreted in the context of R-parity-violating supersymmetry models that feature prompt gluino-pair production decaying directly to three jets each or decaying to two jets and a neutralino which subsequently decays promptly to three jets. No significant excess over the Standard Model expectation is observed and exclusion limits at the 95% confidence level are extracted. Gluinos with masses up to 1800 GeV are excluded when decaying directly to three jets. In the cascade scenario, gluinos with masses up to 2340 GeV are excluded for a neutralino with mass up to 1250 GeV.

Abstract:

The MALTA silicon pixel detector combines a depleted monolithic active pixel sensor (DMAPS) with a fully asynchronous front-end and readout. It features a high granularity pixel matrix with a 36.4 μm symmetric pixel pitch, low power consumption of <1 μW∕pixel and low material budget with detector thicknesses as little as 50 μm. It achieves a radiation hardness to 100MRad TID and more than 1 × 10E15 1 MeV 𝑛eq∕cm2 with a time resolution of <2 ns (Pernegger et al., 2023).

In order to cover large sensitive areas efficiently with a minimum of power and data connections the development of modules, comprising of up to 4 MALTA detectors, is studied.

This contribution presents the beam test performance of parallel and serial powered MALTA 4-chip modules in an effort to characterize the sensor’s chip-to-chip data and power transmission and prepare the production of a first prototype of an ultra-light weight 4-chip module on a flexible circuit with next generation MALTA2 sensors.