Heon Jin

Abstract:

Mixed lead-tin (Pb:Sn) halide perovskites are promising absorbers withnarrow-bandgaps (1.25–1.4 eV) suitable for high-efficiency all-perovskitetandem solar cells. However, solution processing of optimally thick Pb:Snperovskite films is notoriously difficult in comparison with their neat-Pbcounterparts. This is partly due to the rapid crystallization of Sn-basedperovskites, resulting in films that have a high degree of roughness. Rougherfilms are harder to coat conformally with subsequent layers usingsolution-based processing techniques leading to contact between theabsorber and the top metal electrode in completed devices, resulting in a lossof VOC , fill factor, efficiency, and stability. Herein, this study employs anon-continuous layer of alumina nanoparticles distributed on the surface ofrough Pb:Sn perovskite films. Using this approach, the conformality of thesubsequent electron-transport layer, which is only tens of nanometres inthickness is improved. The overall maximum-power-point-tracked efficiencyimproves by 65% and the steady-state VOC improves by 28%. Application ofthe alumina nanoparticles as an interfacial buffer layer also results in highlyreproducible Pb:Sn solar cell devices while simultaneously improving devicestability at 65 °C under full spectrum simulated solar irradiance. Aged devicesshow a six-fold improvement in stability over pristine Pb:Sn devices,increasing their lifetime to 120 h

Abstract:

Mixed lead-tin (Pb:Sn) halide perovskites are promising absorbers with narrow-bandgaps (1.25–1.4 eV) suitable for high-efficiency all-perovskite tandem solar cells. However, solution processing of optimally thick Pb:Sn perovskite films is notoriously difficult in comparison with their neat-Pb counterparts. This is partly due to the rapid crystallization of Sn-based perovskites, resulting in films that have a high degree of roughness. Rougher films are harder to coat conformally with subsequent layers using solution-based processing techniques leading to contact between the absorber and the top metal electrode in completed devices, resulting in a loss of VOC, fill factor, efficiency, and stability. Herein, this study employs a non-continuous layer of alumina nanoparticles distributed on the surface of rough Pb:Sn perovskite films. Using this approach, the conformality of the subsequent electron-transport layer, which is only tens of nanometres in thickness is improved. The overall maximum-power-point-tracked efficiency improves by 65% and the steady-state VOC improves by 28%. Application of the alumina nanoparticles as an interfacial buffer layer also results in highly reproducible Pb:Sn solar cell devices while simultaneously improving device stability at 65 °C under full spectrum simulated solar irradiance. Aged devices show a six-fold improvement in stability over pristine Pb:Sn devices, increasing their lifetime to 120 h.