Prof Henry Snaith FRS

Abstract:

Here, the use of metal oxide layers both for charge transport and injection into an emissive semiconducting polymer and also for the control of the in-plane waveguided optical modes in light-emitting diodes (LEDs) is reported. The high refractive index of zinc oxide is used to confine these modes away from the absorbing electrodes, and include a nano-imprinted grating in the polymer layer to introduce distributed feedback and enhance optical out-coupling. These structures show a large increase in the luminescence efficiency over conventional devices, with photoluminescence efficiency increased by up to 45%. Furthermore, optically-pumped lasing in hybrid oxide polymer LEDs is demonstrated. A tuneable lasing emission is also obtained in a single device structure by employing a graduated thickness of a zinc oxide inter-layer. This demonstrates the scope for using such architectures to improve the external efficiency of organic semiconductor LEDs, and opens new possibilities for the realization of polymer injection lasers. ©2009 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Abstract:

An investigation of the function of an indolene-based organic dye, termed D149, incorporated in to solid-state dye-sensitized solar cells using 2,20,7,70- tetrakis(N,N-di-p-methoxypheny-amine)-9,90-spirobifluorene (spiro- OMeTAD) as the hole transport material is reported. Solar cell performance characteristics are unprecedented under low light levels, with the solar cells delivering up to 70% incident photon-to-current efficiency (IPCE) and over 6% power conversion efficiency, as measured under simulated air mass (AM) 1.5 sun light at 1 and 10mW cm-2. However, a considerable nonlinearity in the photocurrent as intensities approach "full sun" conditions is observed and the devices deliver up to 4.2% power conversion efficiency under simulated sun light of 100mW cm-2. The influence of dye-loading upon solar cell operation is investigated and the thin films are probed via photoinduced absorption (PIA) spectroscopy, time-correlated single-photon counting (TCSPC), and photoluminescence quantum efficiency (PLQE) measurements in order to deduce the cause for the non ideal solar cell performance. The data suggest that electron transfer from the photoexcited sensitizer into the TiO2 is only between 10 to 50% efficient and that ionization of the photo excited dye via hole transfer directly to spiro-OMeTAD dominates the charge generation process. A persistent dye bleaching signal is also observed, and assigned to a remarkably high density of electrons "trapped" within the dye phase, equivalent to 1.8×1017 cm-3 under full sun illumination. it is believed that this localized space charge build-up upon the sensitizer is responsible for the non-linearity of photocurrent with intensity and nonoptimum solar cell performance under full sun conditions.2009 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Abstract:

The morphology of TiO2 plays an important role in the operation of solid-state dye-sensitized solar cells. By using polyisoprene-block- ethyleneoxide (PI-b-PEO) copolymers as structure directing agents for a sol-gel based synthesis of mesoporous TiO2, we demonstrate a strategy for the detailed control of the semiconductor morphology on the 10 nm length scale. The careful adjustment of polymer molecular weight and titania precursor content is used to systematically vary the material structure and its influence upon solar cell performance is investigated. Furthermore, the use of a partially sp ² hybridized structure directing polymer enables the crystallization of porous TiO2 networks at high temperatures without pore collapse, improving its performance in solid-state dye-sensitized solar cells. © 2009 The Royal Society of Chemistry.

Abstract:

We report a hydrothermal synthesis method for MgO shell coatings directly onto the surface of ZnO nanowire arrays. The entire process can be carried out below 100 °C. The MgO shells are produced by the addition of 10 mM magnesium nitrate with 0.2 M sodium hydroxide in water, resulting in a shell thickness of up to 8 nm, verified by high resolution transmission electron microscopy. The viability of the MgO layer as a functional element of optoelectronic devices was tested on solid-state organic hole-transporter based dye-sensitized solar cells. Incorporation of the MgO shell into the solar cell resulted in substantive efficiency improvements of over 400% in comparison to the pristine ZnO nanowire based photovoltaics, indicating that electrons can efficiently tunnel through the 'insulating' MgO shell.