Prof Henry Snaith FRS

Abstract:

Although metal halide perovskite photovoltaics have shown an unprecedented rise in power conversion efficiency (PCE), they remain far from their theoretical PCE limit. Among the highest efficiencies to date are delivered when polycrystalline films are enhanced via “molecular passivation”, but this can introduce new instabilities, in particular under severe accelerated aging conditions (e.g., at 85 °C in the dark or under full spectrum simulated sunlight). Here, we utilize a benzylammonium bromide passivation treatment to improve device performance, achieving the champion stabilized power output (SPO) of 19.5 % in a p-i-n device architecture. We correlate the improved device performance with a significant increase in charge carrier diffusion lengths, mobilities, and lifetimes. Furthermore, treated devices maintain an increased performance during 120 h combined stressing under simulated full spectrum sunlight at 85 °C, indicating that enhancement from this passivation treatment is sustained under harsh accelerated aging conditions. This is a crucial step toward real-world operation-relevant passivation treatments.

Abstract:

Mixed tin‐lead halide perovskites are promising low‐bandgap absorbers for all‐perovskite tandem solar cells that offer higher efficiencies than single‐junction devices. A significant barrier to higher performance and stability is the ready oxidation of tin, commonly mitigated by various additives whose impact is still poorly understood for mixed tin‐lead perovskites. Here, the effects of the commonly used SnF2 additive are revealed for FA0.83Cs0.17SnxPb1−xI3 perovskites across the full compositional lead‐tin range and SnF2 percentages of 0.1–20% of precursor tin content. SnF2 addition causes a significant reduction in the background hole density associated with tin vacancies, yielding longer photoluminescence lifetimes, decreased energetic disorder, reduced Burstein–Moss shifts, and higher charge‐carrier mobilities. Such effects are optimized for SnF2 addition of 1%, while for 5% SnF2 and above, additional nonradiative recombination pathways begin to appear. It is further found that the addition of SnF2 reduces a tetragonal distortion in the perovskite structure deriving from the presence of tin vacancies that cause strain, particularly for high tin content. The optical phonon response associated with inorganic lattice vibrations is further explored, exhibiting a shift to higher frequency and significant broadening with increasing tin fraction, in accordance with lower effective atomic metal masses and shorter phonon lifetimes.

Abstract:

The success of organic-inorganic perovskites in optoelectronics is dictated by the complex interplay between various underlying microscopic phenomena. The structural dynamics of organic cations and the inorganic sublattice after photoexcitation are hypothesized to have a direct effect on the material properties, thereby affecting the overall device performance. Here, we use ultrafast heterodyne-detected two-dimensional (2D) electronic spectroscopy to reveal impulsively excited vibrational modes of methylammonium (MA) lead iodide perovskite, which drive the structural distortion after photoexcitation. Vibrational analysis of the measured data allows us to monitor the time-evolved librational motion of the MA cation along with the vibrational coherences of the inorganic sublattice. Wavelet analysis of the observed vibrational coherences reveals the coherent generation of the librational motion of the MA cation within ∼300 fs complemented with the coherent evolution of the inorganic skeletal motion. To rationalize this observation, we employed the configuration interaction singles (CIS), which support our experimental observations of the coherent generation of librational motions in the MA cation and highlight the importance of the anharmonic interaction between the MA cation and the inorganic sublattice. Moreover, our advanced theoretical calculations predict the transfer of the photoinduced vibrational coherence from the MA cation to the inorganic sublattice, leading to reorganization of the lattice to form a polaronic state with a long lifetime. Our study uncovers the interplay of the organic cation and inorganic sublattice during formation of the polaron, which may lead to novel design principles for the next generation of perovskite solar cell materials.