Optical description of solid-state dye-sensitized solar cells. II. Device optical modeling with implications for improving efficiency
Journal of Applied Physics 106:7 (2009)
Abstract:
We use the optical transfer-matrix method to quantify the spatial distribution of light in solid-state dye-sensitized solar cells (DSCs), employing material optical properties measured experimentally in the accompanying article (Part I) as input into the optical model. By comparing the optical modeling results with experimental photovoltaic action spectra for solid-state DSCs containing either a ruthenium-based dye or an organic indoline-based dye, we show that the internal quantum efficiency (IQE) of the devices for both dyes is around 60% for almost all wavelengths, substantially lower than the almost 100% IQE measured for liquid DSCs, indicating substantial electrical losses in solid-state DSCs that can account for much of the current factor-of-two difference between the efficiencies of liquid and solid-state DSCs. The model calculations also demonstrate significant optical losses due to absorption by 2, 2′,7, 7′ -tetrakis-(N,N -di- p -methoxyphenyl- amine)-9, 9′ -spirobifluorene (spiro-OMeTAD) and TiO2 in the blue and to a lesser extent throughout the visible. As a consequence, the more absorptive organic dye, D149, should outperform the standard ruthenium complex sensitizer, Z907, for all device thicknesses, underlining the potential benefits of high extinction coefficient dyes optimized for solid-state DSC operation. © 2009 American Institute of Physics.Optical description of solid-state dye-sensitized solar cells. I. Measurement of layer optical properties
Journal of Applied Physics 106:7 (2009)
Abstract:
The efficiency of a photovoltaic device is limited by the portion of solar energy that can be captured. We discuss how to measure the optical properties of the various layers in solid-state dye-sensitized solar cells (SDSC). We use spectroscopic ellipsometry to determine the complex refractive index of each of the various layers in a SDSC. Each of the ellipsometry fits is used to calculate a transmission spectrum that is compared to a measured transmission spectrum. The complexities of pore filling on the fitting of the ellipsometric data are discussed. Scanning electron microscopy and energy dispersive x-ray spectroscopy is shown to be an effective method for determining pore filling in SDSC layers. Accurate effective medium optical constants for each layer are presented and the material limits under which these optical constants can be used are discussed. © 2009 American Institute of Physics.A bicontinuous double gyroid hybrid solar cell
Nano Letters 9:8 (2009) 2807-2812
Abstract:
We report the first successful application of an ordered bicontinuous gyroid semiconducting network in a hybrid bulk heterojunction solar cell. The freestanding gyroid network is fabricated by electrochemical deposition into the 10 nm wide voided channels of a self-assembled, selectively degradable block copolymer film. The highly ordered pore structure is ideal for uniform infiltration of an organic hole transporting material, and solid-state dye-sensitized solar cells only 400 nm thick exhibit up to 1.7% power conversion efficiency. This patterning technique can be readily extended to other promising heterojunction systems and is a major step toward realizing the full potential of self-assembly in the next generation of device technologies. © 2009 American Chemical Society.Block copolymer morphologies in dye-sensitized solar cells: Probing the photovoltaic structure-function relation
Nano Letters 9:8 (2009) 2813-2819
Abstract:
We integrate mesostructured titania arrays into dye-sensitized solar cells by replicating ordered, oriented one-dimensional (1D) columnar and three-dimensional (3D) bicontinuous gyroid block copolymer phases. The solar cell performance, charge transport, and recombination are investigated. We observe faster charge transport in 1D "wires" than through 3D gyroid arrays. However, owing to their structural instability, the surface area of the wire arrays is low, inhibiting the solar cell performance. The gyroid morphology, on the other hand, outperforms the current state-of-the-art mesoporous nanoparticle films. © 2009 American Chemical Society.A bicontinuous double gyroid hybrid solar cell.
Nano Lett 9:8 (2009) 2807-2812