Rubin-LSST

Abstract:

The CMS silicon pixel detector is the tracking device closest to the LHC p-p collisions, which precisely reconstructs the charged particle trajectories. The planar technology used in the current innermost layer of the pixel detector will reach the design limit for radiation hardness at the end of Phase I upgrade and will need to be replaced before the Phase II upgrade in 2020. Due to its unprecedented performance in harsh radiation environments, 3D silicon technology is under consideration as a possible replacement of planar technology for the High Luminosity-LHC or HL-LHC. 3D silicon detectors are fabricated by the Deep Reactive-Ion-Etching (DRIE) technique which allows p-and n-type electrodes to be processed through the silicon substrate as opposed to being implanted through the silicon surface. The 3D CMS pixel devices presented in this paper were processed at FBK. They were bump bonded to the current CMS pixel readout chip, tested in the laboratory, and testbeams carried out at FNAL with the proton beam of 120 GeV/c. In this paper we present the laboratory and beam test results for the irradiated 3D CMS pixel devices. © 2013 CERN.

Abstract:

The luminosity calibration for the ATLAS detector at the LHC during pp collisions at √s = 7 TeV in 2010 and 2011 is presented. Evaluation of the luminosity scale is performed using several luminosity-sensitive detectors, and comparisons are made of the long-term stability and accuracy of this calibration applied to the pp collisions at √s = 7 TeV. A luminosity uncertainty of δL/L= ± 3.5 % is obtained for the 47 pb^-1 of data delivered to ATLAS in 2010, and an uncertainty of δL/L= ± 1.8 % is obtained for the 5.5 fb^-1 delivered in 2011.

Abstract:

In order to study further the long-range correlations ("ridge") observed recently in p + Pb collisions at √sNN= 5.02 TeV, the second-order azimuthal anisotropy parameter of charged particles, v2, has been measured with the cumulant method using the ATLAS detector at the LHC. In a data sample corresponding to an integrated luminosity of approximately 1 μb-1, the parameter v2has been obtained using two- and four-particle cumulants over the pseudorapidity range |η|<2.5. The results are presented as a function of transverse momentum and the event activity, defined in terms of the transverse energy summed over 3.1 < η <4.9 in the direction of the Pb beam. They show features characteristic of collective anisotropic flow, similar to that observed in Pb + Pb collisions. A comparison is made to results obtained using two-particle correlation methods, and to predictions from hydrodynamic models of p +Pb collisions. Despite the small transverse spatial extent of the p + Pb collision system, the large magnitude of v2and its similarity to hydrodynamic predictions provide additional evidence for the importance of final-state effects in p + Pb reactions. © 2013 CERN. Published by Elsevier B.V.

Abstract:

Using data from proton-antiproton collisions at Ecms=1.96 TeV recorded by the CDF II detector at the Fermilab Tevatron, evidence for the excited resonance state Lambda_b* is presented in its Lambda_b0 pi+ pi- decay, followed by the Lambda_b0 -->Lambda_c+ (-->proton K- pi+) pi- decays. The analysis is based on a data sample corresponding to an integrated luminosity of 9.6/fb collected by an online event selection based on charged-particle tracks displaced from the proton-antiproton interaction point. The significance of the observed signal is 3.5 Gaussian sigmas. The mass of the observed state is found to be 5919.22 +- 0.76 MeV in agreement with similar findings in proton-proton collision experiments.