Are cold flows detectable with metal absorption lines?

ArXiv 1012.0059 (2010)

Authors:

Taysun Kimm, Adrianne Slyz, Julien Devriendt, Christophe Pichon

Abstract:

[Abridged] Cold gas flowing within the "cosmic web" is believed to be an important source of fuel for star formation at high redshift. However, the presence of such filamentary gas has never been observationally confirmed. In this work, we investigate in detail whether such cold gas is detectable using low-ionisation metal absorption lines, such as CII \lambda1334 as this technique has a proven observational record for detecting gaseous structures. Using a large statistical sample of galaxies from the Mare Nostrum N-body+AMR cosmological simulation, we find that the typical covering fraction of the dense, cold gas in 10^12 Msun haloes at z~2.5 is lower than expected (~5%). In addition, the absorption signal by the interstellar medium of the galaxy itself turns out to be so deep and so broad in velocity space that it completely drowns that of the filamentary gas. A detectable signal might be obtained from a cold filament exactly aligned with the line of sight, but this configuration is so unlikely that it would require surveying an overwhelmingly large number of candidate galaxies to tease it out. Finally, the predicted metallicity of the cold gas in filaments is extremely low (\leq 0.001 Zsun). Should this result persist when higher resolution runs are performed, it would significantly increase the difficulty of detecting filamentary gas inflows using metal lines. However, even if we assume that filaments are enriched to Zsun, the absorption signal that we compute is still weak. We are therefore led to conclude that it is extremely difficult to observationally prove or disprove the presence of cold filaments as the favorite accretion mode of galaxies using low-ionisation metal absorption lines. The Ly-alpha emission route looks more promising but due to the resonant nature of the line, radiative transfer simulations are required to fully characterize the observed signal.

Are cold flows detectable with metal absorption lines?

(2010)

Authors:

Taysun Kimm, Adrianne Slyz, Julien Devriendt, Christophe Pichon

An image slicer-based integral-field spectrograph for EPICS

Proceedings of SPIE - The International Society for Optical Engineering 7735:PART 1 (2010)

Authors:

M Tecza, N Thatte, G Salter, F Clarke

Abstract:

We present the results of a design study for an integral field spectrograph as the "back-end" instrument for spectroscopy of exoplanets carried out in the context of the EPICS Phase A study. EPICS is the planet finder imager and spectrograph for the E-ELT. In our study we investigated the feasibility of an image slicer based integral field spectrograph and developed an optical design for the image slicer and the necessary pre-optics, as well as the spectrograph optics. We present a detailed analysis of the optical performance of the design. © 2010 Copyright SPIE - The International Society for Optical Engineering.

Coronagraphic capability for HARMONI at the E-ELT

Proceedings of SPIE - The International Society for Optical Engineering 7735:PART 1 (2010)

Authors:

S Gladysz, NA Thatte, F Clarke, M Tecza, GS Salter

Abstract:

HARMONI is a proposed visible and near-infrared integral field spectrograph for the European Extremely Large Telescope. We are exploring the merits of adding a coronagraphic capability to HARMONI, specifically targeted at enabling observations of faint, nearby companions (primarily extra-solar planets) that require high contrast. Although HARMONI is not fed by extreme adaptive optics, we show that substantial contrasts can be achieved by post-processing of the hyperspectral data cube using spectral deconvolution. We make predictions of achievable contrast as a function of coronagraph design, based on realistic models of the telescope's aberrations. © 2010 Copyright SPIE - The International Society for Optical Engineering.

Design drivers for a wide-field multi-object spectrograph for the William Herschel Telescope

Proceedings of SPIE - The International Society for Optical Engineering 7735:PART 1 (2010)

Authors:

M Balcells, CR Benn, D Carter, GB Dalton, SC Trager, S Feltzing, MAW Verheijen, M Jarvis, W Percival, DC Abrams, T Agocs, AGA Brown, D Cano, C Evans, A Helmi, IJ Lewis, R McLure, RF Peletier, I Pérez-Fournon, RM Sharples, IAJ Tosh, I Trujillo, N Walton, KB Westhall

Abstract:

Wide-field multi-object spectroscopy is a high priority for European astronomy over the next decade. Most 8-10m telescopes have a small field of view, making 4-m class telescopes a particularly attractive option for wide-field instruments. We present a science case and design drivers for a wide-field multi-object spectrograph (MOS) with integral field units for the 4.2-m William Herschel Telescope (WHT) on La Palma. The instrument intends to take advantage of a future prime-focus corrector and atmospheric-dispersion corrector (Agocs et al, this conf.) that will deliver a field of view 2 deg in diameter, with good throughput from 370 to 1,000 nm. The science programs cluster into three groups needing three different resolving powers R: (1) high-precision radial-velocities for Gaia-related Milky Way dynamics, cosmological redshift surveys, and galaxy evolution studies (R = 5,000), (2) galaxy disk velocity dispersions (R = 10,000) and (3) high-precision stellar element abundances for Milky Way archaeology (R = 20,000). The multiplex requirements of the different science cases range from a few hundred to a few thousand, and a range of fibre-positioner technologies are considered. Several options for the spectrograph are discussed, building in part on published design studies for E-ELT spectrographs. Indeed, a WHT MOS will not only efficiently deliver data for exploitation of important imaging surveys planned for the coming decade, but will also serve as a test-bed to optimize the design of MOS instruments for the future E-ELT. © 2010 Copyright SPIE - The International Society for Optical Engineering.