Photovoltaic and optoelectronic device group

Abstract:

Inverted-structure metal halide perovskite solar cells (PSCs) have attractive advantages like low-temperature processability and outstanding device stability. The two-step sequential deposition method shows the benefits of easy fabrication and decent performance repeatability. Nevertheless, it is still challenging to achieve high-performance inverted PSCs with similar or equal power conversion efficiencies (PCEs) compared to the regular-structure counterparts via this deposition method. Here, an improved two-step sequential deposition technique is demonstrated via treating the bottom organic hole-selective layer with the binary modulation system composed of a polyelectrolyte and an ammonium salt. Such improved sequential deposition method leads to the spontaneous refinement of up and buried interfaces for the perovskite films, contributing to high film quality with significantly reduced defect density and better charge transportation. As a result, the optimized PSCs show a large enhancement in the open-circuit voltage by 100 mV and a dramatic lift in the PCE from 18.1% to 23.4%, delivering the current state-of-the-art performances for inverted PSCs. Moreover, good operational and thermal stability is achieved upon the improved inverted PSCs. This innovative strategy helps gain a deeper insight into the perovskite crystal growth and defect modulation in the inverted PSCs based on the two-step sequential deposition method.

Abstract:

Interfaces in thin-film photovoltaics play a pivotal role in determining device efficiency and longevity. Herein, we study the top surface treatment of mixed tin-lead (∼1.26 eV) halide perovskite films for p-i-n solar cells. We are able to promote charge extraction by treating the perovskite surface with piperazine. This compound reacts with the organic cations at the perovskite surface, modifying the surface structure and tuning the interfacial energy level alignment. In addition, the combined treatment with C₆₀ pyrrolidine tris-acid (CPTA) reduces hysteresis and leads to efficiencies up to 22.7%, with open-circuit voltage values reaching 0.90 V, ∼92% of the radiative limit for the band gap of this material. The modified cells also show superior stability, with unencapsulated cells retaining 96% of their initial efficiency after >2000 hours of storage in N₂ and encapsulated cells retaining 90% efficiency after >450 hours of storage in air. Intriguingly, CPTA preferentially binds to Sn²⁺ sites at film surface over Pb²⁺ due to the energetically favoured exposure of the former, according to first-principles calculations. This work provides new insights into the surface chemistry of perovskite films in terms of their structural, electronic, and defect characteristics and we use this knowledge to fabricate state-of-the-art solar cells. This article is protected by copyright. All rights reserved.

Abstract:

Achieving the long-term stability of perovskite solar cells is arguably the most important challenge required to enable widespread commercialization. Understanding the perovskite crystallization process and its direct impact on device stability is critical to achieving this goal. The commonly employed dimethyl-formamide/dimethyl-sulfoxide solvent preparation method results in a poor crystal quality and microstructure of the polycrystalline perovskite films. In this work, we introduce a high-temperature dimethyl-sulfoxide-free processing method that utilizes dimethylammonium chloride as an additive to control the perovskite intermediate precursor phases. By controlling the crystallization sequence, we tune the grain size, texturing, orientation (corner-up versus face-up) and crystallinity of the formamidinium (FA)/caesium (FA)yCs1–yPb(IxBr1–x)3 perovskite system. A population of encapsulated devices showed improved operational stability, with a median T80 lifetime (the time over which the device power conversion efficiency decreases to 80% of its initial value) for the steady-state power conversion efficiency of 1,190 hours, and a champion device showed a T80 of 1,410 hours, under simulated sunlight at 65 °C in air, under open-circuit conditions. This work highlights the importance of material quality in achieving the long-term operational stability of perovskite optoelectronic devices.

Abstract:

Perovskite interfaces critically influence the final performance of the photovoltaic devices. Optimizing them by reducing the defect densities or improving the contact with the charge transporting material is key to further enhance the efficiency and stability of perovskite solar cells. Inverted (p-i-n) devices can particularly benefit here, as evident from various successful attempts. However, every reported strategy is adapted to specific cell structures and compositions, affecting their robustness and applicability by other researchers. In this work, we present the universality of perovskite top surface post-treatment with ethylenediammonium diiodide (EDAI₂) for p-i-n devices. To prove it, we compare devices bearing perovskite films of different composition, i.e., Sn-, Pb-, and mixed Sn-Pb-based devices, achieving efficiencies of up to 11.4, 22.0, and 22.9%, respectively. A careful optimization of the EDAI₂ thickness indicates a different tolerance for Pb- and Sn-based devices. The main benefit of this treatment is evident in the open-circuit voltage, with enhancements of up to 200 mV for some compositions. In addition, we prove that this treatment can be successfully applied by both wet (spin-coating) and dry (thermal evaporation) methods, regardless of the composition. The versatility of this treatment makes it highly appealing for industrial application, as it can be easily adapted to specific processing requirements. We present a detailed experimental protocol, aiming to provide the community with an easy, universal perovskite post-treatment method for reliably improving the device efficiency, highlighting the potential of interfaces for the field.

Abstract:

Perovskite/perovskite tandem solar cells have recently exceeded the record power conversion efficiency (PCE) of single-junction perovskite solar cells. They are typically built in the superstrate configuration, in which the device is illuminated from the substrate side. This limits the fabrication of the solar cell to transparent substrates, typically glass coated with a transparent conductive oxide (TCO), and adds constraints because the first subcell that is deposited on the substrate must contain the wide-bandgap perovskite. However, devices in the substrate configuration could potentially be fabricated on a large variety of opaque and inexpensive substrates, such as plastic and metal foils. Importantly, in the substrate configuration the narrow-bandgap subcell is deposited first, which allows for more freedom in the device design. In this work, we report perovskite/perovskite tandem solar cells fabricated in the substrate configuration. As the substrate we use TCO-coated glass on which a solution-processed narrow-bandgap perovskite solar cell is deposited. All of the other layers are then processed using vacuum sublimation, starting with the charge recombination layers, then the wide-bandgap perovskite subcell, and finishing with the transparent top TCO electrode. Proof-of-concept tandem solar cells show a maximum PCE of 20%, which is still moderate compared to those of best-in-class devices realized in the superstrate configuration yet higher than those of the corresponding single-junction devices in the substrate configuration. As both the top and bottom electrodes are semitransparent, these devices also have the potential to be used as bifacial tandem solar cells.