A simple method to widen the IF bandwidth of a high frequency SIS mixer

24th International Symposium on Space Terahertz Technology (2013)

Authors:

Boon Tan, G Yassin, P Grimes

Abstract:

In this paper, we describe a simple method for widening the instantaneous frequency (IF) bandwidth of a high frequency superconductor-insulator-superconductor (SIS) mixer. This method requires only a standard PCB technology, without incurring any difficulties or complication in altering the tunnel junction fabrication. It involves the use of a simple multi-stage IF transformer to match the dynamic output impedance of the SIS mixer to a 50 Ω load over a wide IF bandwidth. We use an existing 650 GHz SIS mixer chip as an example to illustrate the methodology of the IF transformer design. In this example, we show how we widen the IF bandwidth of the mixer to operate over 4–12 GHz bandwidth using this simple impedance matching method.

Broadband planar Yagi antenna for millimetre & sub-millimetre detectors

UCMMT 2013 - 2013 6th UK, Europe, China Millimeter Waves and THz Technology Workshop (2013)

Authors:

BK Tan, G Yassin, S Withington, D Goldie

Abstract:

Conventional sub-millimetre wave detectors utilise waveguide probe or slot antenna to couple the signal from the sky. In this paper, we report an alternative type of planar antenna design that has high quality radiation pattern across a large operating bandwidth, compact and easy to fabricate. © 2013 IEEE.

Preliminary Measurement Results of a 650 GHz Planar Circuit Balanced SIS Mixer

IEEE Transactions on Terahertz Science and Technology Institute of Electrical and Electronics Engineers (IEEE) 3:1 (2013) 32-38

Authors:

Boon-Kok Tan, Ghassan Yassin, Paul Grimes, Karl Jacobs, Stafford Withington

Smooth walled feed horns for mm and submm radio astronomy

UCMMT 2013 - 2013 6th UK, Europe, China Millimeter Waves and THz Technology Workshop (2013)

Authors:

J Leech, BK Tan, G Yassin

Abstract:

Here we describe our work designing multiple flare-angle horns, optimised using a genetic algorithm. Several horns designs will be described and experimentally measured beam patterns for horns at 230 GHz will be presented. In addition, we will present new, wide bandwidth horns offering good performance over a ∼30% bandwidth. © 2013 IEEE.

Design of a 650 GHz planar circuit balanced mixer

23rd International Symposium on Space Terahertz Technology 2012, ISSTT 2012 (2012) 16-21

Authors:

BK Tan, G Yassin, P Grimes, K Jacobs, S Withington

Abstract:

We present the design of a broadband balanced superconductor-insulator- superconductor (SIS) mixer, which uses two back-to-back unilateral finline tapers. A key feature of our design is the use of a thin silicon-on-insulator (SOI) substrate, which enables the employment of a finline mixer at high frequencies. We integrated all of the required superconducting RF circuits onto a single chip using planar circuit technology, and retained the simplest fabrication processes without any lumped elements. This approach results in a very simple mixer-block design, which is desirable for constructing medium-format focal-plane imaging arrays. In the paper, we present in detail the electromagnetic modelling of each of the planar components making up the entire balanced mixer. The electromagnetic simulations were carried out using HFSS, and the heterodyne performance of the complete balanced chip was accessed using SuperMix.