Xinyi Shen

Abstract:

Metal halide perovskite based tandem solar cells are promising to achieve power conversion efficiency beyond the theoretical limit of their single-junction counterparts. However, overcoming the significant open-circuit voltage deficit present in wide-bandgap perovskite solar cells remains a major hurdle for realizing efficient and stable perovskite tandem cells. Here, a holistic approach to overcoming challenges in 1.8 eV perovskite solar cells is reported by engineering the perovskite crystallization pathway by means of chloride additives. In conjunction with employing a self-assembled monolayer as the hole-transport layer, an open-circuit voltage of 1.25 V and a power conversion efficiency of 17.0% are achieved. The key role of methylammonium chloride addition is elucidated in facilitating the growth of a chloride-rich intermediate phase that directs crystallization of the desired cubic perovskite phase and induces more effective halide homogenization. The as-formed 1.8 eV perovskite demonstrates suppressed halide segregation and improved optoelectronic properties.

Abstract:

In this work, we couple theoretical and experimental approaches to understand and reduce the losses of wide bandgap Br-rich perovskite pin devices at open-circuit voltage (V_OC) and short-circuit current (J_SC) conditions. A mismatch between the internal quasi-Fermi level splitting (QFLS) and the external V_OC is detrimental for these devices. We demonstrate that modifying the perovskite top-surface with guanidinium-Br and imidazolium-Br forms a low-dimensional perovskite phase at the n-interface, suppressing the QFLS-V_OC mismatch, and boosting the V_OC. Concurrently, the use of an ionic interlayer or a self-assembled monolayer at the p-interface reduces the inferred field screening induced by mobile ions at J_SC, promoting charge extraction and raising the J_SC. The combination of the n- and p-type optimizations allows us to approach the thermodynamic potential of the perovskite absorber layer, resulting in 1 cm² devices with performance parameters of V_OCs up to 1.29 V, fill factors above 80% and J_SCs up to 17 mA/cm², in addition to a thermal stability T₈₀ lifetime of more than 3500 h at 85 °C.

Abstract:

Biomass-derived carbon materials (BCMs) are encountering the most flourishing moment because of their versatile properties and wide potential applications. Numerous BCMs, including 0D carbon spheres and dots, 1D carbon fibers and tubes, 2D carbon sheets, 3D carbon aerogel, and hierarchical carbon materials have been prepared. At the same time, their structure-property relationship and applications have been widely studied. This paper aims to present a review on the recent advances in the controllable preparation and potential applications of BCMs, providing a reference for future work. First, the chemical compositions of typical biomass and their thermal degradation mechanisms are presented. Then, the typical preparation methods of BCMs are summarized and the relevant structural management rules are discussed. Besides, the strategies for improving the structural diversity of BCMs are also presented and discussed. Furthermore, the applications of BCMs in energy, sensing, environment, and other areas are reviewed. Finally, the remaining challenges and opportunities in the field of BCMs are discussed.

Abstract:

Recently, electronic skin and smart textiles have attracted considerable attention. Flexible sensors, as a kind of indispensable components of flexible electronics, have been extensively studied. However, wearable airflow sensors capable of monitoring the environment airflow in real time are rarely reported. Herein, by mimicking the spider's fluff, an ultrasensitive and flexible all-textile airflow sensor based on fabric with in situ grown carbon nanotubes (CNTs) is developed. The fabric decorated with fluffy-like CNTs possesses exceptionally large contact area, endowing the airflow sensor with superior properties including ultralow detection limit (≈0.05 m s^-1 ), multiangle airflow differential response (0°-90°), and fast response time (≈1.3 s). Besides, the fluffy fabric airflow sensor can be combined with a pristine fabric airflow sensor to realize highly sensitive detection in a wide airflow range (0.05-7.0 m s^-1 ). Its potential applications including transmitting information according to Morse code by blowing the sensors, monitoring increasing and decreasing airflow velocity, and alerting blind people walking outside about potential hazard induced by nearby fast-moving objects are demonstrated. Furthermore, the airflow sensor can be directly integrated into clothing as stylish designs without sacrificing comfortness. It is believed that the ultrasensitive all-textile airflow sensor holds great promise for applications in smart textiles and wearable electronics.

Abstract:

Hybrid perovskite possesses excellent photoelectric properties, including large light-absorption capacity and high carrier mobility, and is an ideal light-absorbing material for photoelectric devices. The grain size and compactness of hybrid perovskite are key factors affecting the performance of photoelectric devices. The photocurrent and photoresponsivity of these devices are relatively low because of the rapidly recombined photoexcited electron-hole pairs in hybrid perovskite. Herein, we develop a facile two-step chemical vapor deposition (CVD) method to synthesize a high-quality van der Waals (vdWs) MAPbI₃/graphene heterostructure for high-performance image sensor. We introduced inorganic sources (PbI₂) to vdWs epitaxially grown PbI₂ film on a seamless graphene monolayer film template through CVD. Methylammonium iodide (MAI) was then reintroduced to prepare the vdWs MAPbI₃/graphene heterostructure. The MAPbI₃ layer is composed of densely packed, large-size grains and displays a smooth surface. High photoresponsivity of 10⁷ A/W is achieved in the corresponding photodetector. Inspired by the human visual system, we designed a flexible photodetector array containing (24 × 24) pixels, achieving perfect image recognition and color discrimination. Our study may greatly facilitate the construction of high-performance optoelectronic devices in artificial retina, biomedical imaging, remote sensing, and optical communication.