Prof Henry Snaith FRS

Abstract:

The stability of perovskite‐based tandem solar cells (TSCs) is the last major scientific/technical challenge to be overcome before commercialization. Understanding the impact of mobile ions on the TSC performance is key to minimizing degradation. Here, a comprehensive study that combines an experimental analysis of ionic losses in Si/perovskite and all‐perovskite TSCs using scan‐rate‐dependent current–voltage (J–V) measurements with drift‐diffusion simulations is presented. The findings demonstrate that mobile ions have a significant influence on the tandem cell performance lowering the ion‐freeze power conversion efficiency from >31% for Si/perovskite and >30% for all‐perovskite tandems to ≈28% in steady‐state. Moreover, the ions cause a substantial hysteresis in Si/perovskite TSCs at high scan speeds (400 s−1), and significantly influence the performance degradation of both devices through internal field screening. Additionally, for all‐perovskite tandems, subcell‐dominated J–V characterization reveals more pronounced ionic losses in the wide‐bandgap subcell during aging, which is attributed to its tendency for halide segregation. This work provides valuable insights into ionic losses in perovskite‐based TSCs which helps to separate ion migration‐related degradation modes from other degradation mechanisms and guides targeted interventions for enhanced subcell efficiency and stability.

Abstract:

Hybrid halide perovskites (HHPs) have revolutionized the field of solar cells due to their low cost, solution-processable synthesis, and exceptional device performance. Although lead (Pb)-based perovskites are currently the most efficient, their application in indoor photovoltaics and wearable electronics is limited by lead’s toxicity. This has intensified the search for Pb-free alternatives, particularly for use in portable electronic devices. In this study, we utilized a vapor-assisted solution process to systematically engineer the composition of bismuth-based perovskite-inspired materials (PIMs) through indium doping, forming homogeneous and pinhole-free (CH3NH3)3Bi2–x In x I9 (Bi–In) films. These bimetallic Bi–In perovskites exhibit enhanced properties, including high recombination resistance, reduced low-frequency capacitance, lower defect density, and minimal microstrain. Electrochemical impedance spectroscopy (EIS) shows significantly reduced ion migration in Bi–In compositions compared with pure bismuth-based counterparts. The optimized Bi–In-based solar cells achieved a power conversion efficiency (PCE) of 2.5% under outdoor illumination and 5.9% under indoor lighting, showcasing their potential as promising lead-free alternatives for photovoltaic applications.

Abstract:

Photovoltaics (PVs) are a critical technology for curbing growing levels of anthropogenic greenhouse gas emissions, and meeting increases in future demand for low-carbon electricity. In order to fulfill ambitions for net-zero carbon dioxide equivalent (CO2eq) emissions worldwide, the global cumulative capacity of solar PVs must increase by an order of magnitude from 0.9 TWp in 2021 to 8.5 TWp by 2050 according to the International Renewable Energy Agency, which is considered to be a highly conservative estimate. In 2020, the Henry Royce Institute brought together the UK PV community to discuss the critical technological and infrastructure challenges that need to be overcome to address the vast challenges in accelerating PV deployment. Herein, we examine the key developments in the global community, especially the progress made in the field since this earlier roadmap, bringing together experts primarily from the UK across the breadth of the PVs community. The focus is both on the challenges in improving the efficiency, stability and levelized cost of electricity of current technologies for utility-scale PVs, as well as the fundamental questions in novel technologies that can have a significant impact on emerging markets, such as indoor PVs, space PVs, and agrivoltaics. We discuss challenges in advanced metrology and computational tools, as well as the growing synergies between PVs and solar fuels, and offer a perspective on the environmental sustainability of the PV industry. Through this roadmap, we emphasize promising pathways forward in both the short- and long-term, and for communities working on technologies across a range of maturity levels to learn from each other.

Abstract:

While amines are widely used as additives in metal-halide perovskites, our understanding of the way amines in perovskite precursor solutions impact the resultant perovskite film is still limited. In this paper, we explore the multiple effects of benzylamine (BnAm), also referred to as phenylmethylamine, used to passivate both FA0.75Cs0.25Pb­(I0.8Br0.2)3 and FA0.8Cs0.2PbI3 perovskite compositions. We show that, unlike benzylammonium (BnA+) halide salts, BnAm reacts rapidly with the formamidinium (FA+) cation, forming new chemical products in solution and these products passivate the perovskite crystal domains when processed into a thin film. In addition, when BnAm is used as a bulk additive, the average perovskite solar cell maximum power point tracked efficiency (for 30 s) increased to 19.3% compared to the control devices 16.8% for a 1.68 eV perovskite. Under combined full spectrum simulated sunlight and 65 °C temperature, the devices maintained a better T 80 stability of close to 2500 h while the control devices have T 80 stabilities of <100 h. We obtained similar results when presynthesizing the product BnFAI and adding it directly into the perovskite precursor solution. These findings highlight the mechanistic differences between amine and ammonium salt passivation, enabling the rational design of molecular strategies to improve the material quality and device performance of metal-halide perovskites.