Oxford Centre for High Energy Density Science (OxCHEDS)

Abstract:

Figure data relating to "A statistical theory of electronic degrees of freedom in wave packet molecular dynamics ". All data is in the format of .txt files.

Abstract:

Hydrodynamic optically-field-ionized (HOFI) plasma channels up to 100mm long are investigated. Optical guiding is demonstrated of laser pulses with a peak input intensity of $6\times10^{17}$ W cm$^{-2}$ through 100mm long plasma channels with on-axis densities measured interferometrically to be as low as $n_{e0} = (1.0\pm0.3)\times10^{17}$cm$^{-3}$. Guiding is also observed at lower axial densities, which are inferred from magneto-hydrodynamic simulations to be approximately $7\times10^{16}$cm$^{-3}$. Measurements of the power attenuation lengths of the channels are shown to be in good agreement with those calculated from the measured transverse electron density profiles. To our knowledge, the plasma channels investigated in this work are the longest, and have the lowest on-axis density, of any free-standing waveguide demonstrated to guide laser pulses with intensities above $>10^{17}$ W cm$^{-2}$.

Abstract:

Our understanding of physical systems generally depends on our ability to match complex computational modelling with measured experimental outcomes. However, simulations with large parameter spaces suffer from inverse problem instabilities, where similar simulated outputs can map back to very different sets of input parameters. While of fundamental importance, such instabilities are seldom resolved due to the intractably large number of simulations required to comprehensively explore parameter space. Here we show how Bayesian machine learning can be used to address inverse problem instabilities, and apply it to two popular experimental diagnostics in plasma physics. We find that the extraction of information from measurements simply on the basis of agreement with simulations is unreliable, and leads to a significant underestimation of uncertainties. We describe how to statistically quantify the effect of unstable inverse models, and describe an approach to experimental design that mitigates its impact.

Abstract:

Inertial confinement fusion fuel suffers increased X-ray radiation losses when carbon from the capsule ablator mixes into the hot-spot. Here we present one and two-dimensional ion VlasovFokker-Planck simulations that resolve hot-spot self heating in the presence a localised spike of carbon mix, totalling 1.9 % of the hot-spot mass. The mix region cools and contracts over tens of picoseconds, increasing its alpha particle stopping power and radiative losses. This makes a localised mix region more severe than an equal amount of uniformly distributed mix. There is also a purely kinetic effect that reduces fusion reactivity by several percent, since faster ions in the tail of the distribution are absorbed by the mix region. Radiative cooling and contraction of the spike induces fluid motion, causing neutron spectrum broadening. This artificially increases the inferred experimental ion temperatures and gives line of sight variations.

Abstract:

We present a machine learning based approach to address the study of transport processes, ubiquitous in continuous mechanics, with particular attention to those phenomena ruled by complex micro-physics, impractical to theoretical investigation, yet exhibiting emergent behavior describable by a closed mathematical expression. Our machine learning model, built using simple components and following a few well established practices, is capable of learning latent representations of the transport process substantially closer to the ground truth than expected from the nominal error characterising the data, leading to sound generalisation properties. This is demonstrated through an idealized study of the long standing problem of heat flux suppression under conditions relevant for fusion and cosmic plasmas. A simple analysis shows that the result applies beyond those case specific assumptions and that, in particular, the accuracy of the learned representation is controllable through knowledge of the data quality (error properties) and a suitable choice of the dataset size. While the learned representation can be used as a plug-in for numerical modeling purposes, it can also be leveraged with the above error analysis to obtain reliable mathematical expressions describing the transport mechanism and of great theoretical value.