Oxford Centre for High Energy Density Science (OxCHEDS)

Abstract:

Diagnosing plasma conditions can give great advantages in optimizing plasma wakefield accelerator experiments. One possible method is that of photon acceleration. By propagating a laser probe pulse through a plasma wakefield and extracting the imposed frequency modulation, one can obtain an image of the density modulation of the wakefield. In order to diagnose the wakefield parameters at a chosen point in the plasma, the probe pulse crosses the plasma at oblique angles relative to the wakefield. In this paper, mathematical expressions relating the frequency modulation of the laser pulse and the wakefield density profile of the plasma for oblique crossing angles are derived. Multidimensional particle-in-cell simulation results presented in this paper confirm that the frequency modulation profiles and the density modulation profiles agree to within 10%. Limitations to the accuracy of the measurement are discussed in this paper. This technique opens new possibilities to quantitatively diagnose the plasma wakefield density at known positions within the plasma column.

Abstract:

This dataset and scripts are used in producing the simulations and images in the "Quantitative single shot and spatially resolved plasma wakefield diagnostics" paper. This uses OSIRIS 431 2D.

Abstract:

The efficiency and uniformity of heating induced by hard x-ray free-electron laser pulse is investigated for 0.5 μm silver foils using the X-ray Pump Probe instrument at the Linac Coherent Light Source facility. Intense 8.9 keV x-ray pulses of 60fs duration deposit energy predominantly via inner-shell ionization to create a non-equilibrium Ag solid density plasma. The x-ray pulses are focused to 14 × 17 μm2 by means of beryllium lenses and by varying the total beam energy, the energy deposition is varied over a range of irradiances from 4.4 to 6.5 × 1015 ∼ W/cm2. Two time-and-space resolved interferometers simultaneously probed the expansion of the front and rear sample surfaces and find evidence of a nearly symmetric expansion pointing to the uniformity of energy deposition over the full target thickness. The experimental results are compared with two different hydrodynamic simulations of the sample expansion. The agreement between experimental and theoretical results yields an estimate of the temperature evolution as a function of x-ray irradiance that varies from 8 to 10 eV for the x-ray irradiances studied.

Abstract:

Dense cryogenic hydrogen is heated by intense femtosecond infrared laser pulses at intensities of 1015-1016 Wcm-2. Three-dimensional particle-in-cell (PIC) simulations predict that this heating is limited to the skin depth, causing an inhomogeneously heated outer shell with a cold core and two prominent temperatures of about 25 and 40 eV for simulated delay times up to +70 fs after the laser pulse maximum. Experimentally, the time-integrated emitted bremsstrahlung in the spectral range of 8-18 nm was corrected for the wavelength-dependent instrument efficiency. The resulting spectrum cannot be fit with a single temperature bremsstrahlung model, and the best fit is obtained using two temperatures of about 13 and 30 eV. The lower temperatures in the experiment can be explained by missing energy-loss channels in the simulations, as well as the inclusion of hot, non- Maxwellian electrons in the temperature calculation. We resolved the time-scale for laser-heating of hydrogen, and PIC results for laser-matter interaction were successfully tested against the experiment data.