Prof Laura Herz FRS

Abstract:

Fully conjugated 3D covalent organic frameworks (COFs) are a newly emerged class of materials that expands reticular chemistry to extended electron delocalization for optoelectronic applications. To overcome the limitations of sp3‐connected 3D frameworks, the pseudo‐tetrahedral motif cyclooctatetrathiophene (COTh) has gained attention for forming fully conjugated 3D COFs. We report on a novel COTh building block, featuring functional formyl groups directly attached to the core's conjugated thiophenes. The modulation synthesis approach with mono‐functionalized inhibitors enables the formation of COTh‐1P COF, which exhibited remarkable crystallinity and permanent porosity. By following this approach and by optimizing the synthesis conditions for the solvothermal growth of thin films, we fabricated the first preferentially oriented conjugated 3D COF films on various substrates without pre‐functionalization. With these thin films, optical pump terahertz probe studies allowed us, for the first time with 3D‐fully conjugated COFs, to provide insights into the excited state and charge‐carrier dynamics of these unique organic frameworks. Low effective masses are discovered for valence and conduction bands by density functional theory simulations. The ability to create crystalline and oriented films of fully π‐conjugated 3D COTh‐based COFs on non‐modified substrates is expected to open the way for integration of such frameworks into diverse optoelectronic applications.

Abstract:

The copper–silver–bismuth–iodide compound Cu2AgBiI6 has emerged as a promising lead-free and environmentally friendly alternative to wide-bandgap lead-halide perovskites for applications in multijunction solar cells. Despite its promising optoelectronic properties, the efficiency of Cu2AgBiI6 is still severely limited by poor charge collection. Here, we investigate the impact of commonly used charge transport layers (CTLs), including poly­[bis­(4-phenyl)­(2,4,6-trimethylphenyl)­amine] (PTAA), CuI, [6,6]-phenyl-C61-butyric acid methyl ester (PCBM), and SnO2, on the structural and optoelectronic properties of coevaporated Cu2AgBiI6 thin films. We reveal that while organic transport layers, such as PTAA and PCBM, form a relatively benign interface, inorganic transport layers, such as CuI and SnO2, induce the formation of unintended impurity phases within the CuI–AgI–BiI3 solid solution space, significantly influencing structural and optoelectronic properties. We demonstrate that identification of these impurity phases requires careful cross-validation combining absorption, X-ray diffraction and THz photoconductivity spectroscopy because their structural and optoelectronic properties are very similar to those of Cu2AgBiI6. Our findings highlight the critical role of CTLs in determining the structural and optoelectronic properties of coevaporated copper–silver–bismuth–iodide thin films and underscore the need for advanced interface engineering to optimize device efficiency and reproducibility.

Abstract:

The rise of metal halide perovskites has prompted a revolution in optoelectronics research [1]. Yet a comprehensive understanding of the vertical charge transport that underlies the soaring efficiencies of perovskite-based solar cells has remained challenging owing to the materials' nanocrystalline structure [2] and competing crystal phases [3]. Here, we simultaneously probe the intrinsic out-of-plane charge-carrier diffusion and the nanoscale morphology by pushing depth-sensitive terahertz near- field nano-spectroscopy [4] to extreme subcycle timescales [5]. Evanescent terahertz fields at the apex of a metallic tip probe ultrafast dynamics of photocarriers in $\text{FA}_{0}.{}_{83}\text{Cs}_{0.17}\text{Pb}(\mathrm{I}_{1}{}_{-\mathrm{x}}\mathrm{C}1_{\mathrm{x}})_{3}$ films with nanoscale spatial resolution (Fig. 1 a). By analysing characteristic phonon signatures in the spectral response, we distinguish domains of the photo active cubic $\alpha$ -phase from the trigonal δ-phase and $\text{PbI}_{2}$ nano-islands (Fig. 1 b). To examine the impact of these nanoscale inhomogeneities on carrier dynamics, we monitor the peak pump-induced signal as a function of pump delay time $t_{\mathrm{p}}$ (Fig. 1c). Notably, the full pump-induced waveforms at different $t_{\mathrm{p}}$ (Fig. 1d) show a deeply subcycle time shift $\Delta t$, which can be microscopically linked to a diffusion-driven change in the vertical carrier distribution with $t_{\mathrm{r}}$ (Fig. 1e, inset). Com-bining a straightforward rate equation model with the finite-dipole model, we extract the evolution of the out-of-plane carrier density profile from $\Delta t$ (Fig. 1e). Mapping the out-of-plane diffusion coefficient $D$ along a line across different grains, including $\alpha$ -phase grains and $\text{PbI}_{2}$ contaminations, we find a homogeneous value of $D=(0.2\pm 0.1)\ \text{cm}^{2}\mathrm{s}^{-1}$, which is surprisingly immune to compositional and structural variations (Fig. 1 f). This robustness of vertical diffusion may contribute to the exceptional performance of perovskite-based devices. Linking in situ carrier transport with nanoscale morphology and chemical composition could introduce a paradigm shift for the analysis and optimization of next-generation optoelectronics that are based on nanocrystalline materials.

Abstract:

The perovskite semiconductor, CsPbI3, holds excellent promise for solar cell applications due to its suitable bandgap. However, achieving phase‐stable CsPbI3 solar cells with high power conversion efficiency remains a major challenge. Ruddlesden–Popper (RP) defects have been identified in a range of perovskite semiconductors, including CsPbI3. However, there is limited understanding as to why they form or their impact on stability and photophysical properties. Here, the prevalence of RP defects is increased with increased Cs‐excess in vapor‐deposited CsPbI3 thin films while superior structural stability but inferior photophysical properties are observed. Significantly, using electron microscopy, it is found that the atomic positions at the planar defect are comparable to those of a free surface, revealing their role in phase stabilization. Density functional theory (DFT) calculations reveal the RP planes are electronically benign, however, antisites observed at RP turning points are likely to be malign. Therefore it is proposed that increasing RP planes while reducing RP turning points offers a breakthrough for improving both phase stability and photophysical performance. The formation mechanism revealed here can apply more generally to RP structures in other perovskite systems.

Abstract:

Two-dimensional (2D) halide perovskites are a versatile material class, exhibiting a layered crystal structure, consisting of inorganic metal–halide sheets separated by organic spacer cations. Unlike their 3D counterparts, 2D perovskites have less strict geometric requirements, allowing for a wider range of molecules to be incorporated. This potentially offers a way to engineer the properties of a 2D perovskite through adequate selection of the organic spacer cations. Our study systematically analyzes the effect of spacer cation length on the electronic and optical properties of Ruddlesden–Popper lead-iodide-based 2D perovskites, using alkylammonium cations of varying chain lengths. Intriguingly, no linear correlation between interlayer distance and the optical gap or valence band position is observed in our measurements. Rather it matters whether the spacer cation contains an odd or even number of carbon atoms in the chain. Notably, these odd-even effects manifest in variations of ionization energy, optical gap as well as charge carrier mobility. Density functional theory calculations reproduce the changes in optical properties, allowing us to identify the underlying mechanism: while even-numbered carbon chains pack efficiently within the organic spacer layer, the shorter odd-numbered chains increase distortions. These distortions lead to variations in the Pb–I–Pb bond angle within the inorganic sheets, resulting in the observed odd-even effect in the (opto-)electronic properties. This understanding will be helpful to make more informed choices regarding the incorporated spacer molecules which can potentially help to enhance performance when integrating such 2D perovskite interlayers into devices.