Snaith group

Abstract:

Nitride perovskites ABN3 are an emerging and highly underexplored class of materials that are of interest due to their intriguing calculated ferroelectric, optoelectronic, and other functional properties. Incorporating novel A-site cations is one strategy to tune and expand such properties; for example, Gd3+ is compelling due to its large magnetic moment, potentially leading to multiferroic behavior. However, the theoretically predicted ground state of GdWN3 was a non-perovskite monoclinic structure. Here, we experimentally show that GdWN3−y crystallizes in a perovskite structure. High-throughput combinatorial sputtering with activated nitrogen is employed to synthesize thin films of Gd2−xWxN3−yOy with oxygen content y < 0.05. Ex situ annealing crystallizes a polycrystalline perovskite phase in a narrow composition window near x = 1. LeBail fits of synchrotron grazing incidence wide angle x-ray scattering data are consistent with a perovskite ground-state structure. Refined density functional theory calculations that included antiferromagnetic configurations confirm that the ground-state structure of GdWN3 is a distorted Pnma perovskite with antiferromagnetic ordering, in contrast to prior predictions. Initial property measurements find that GdWN3−y is paramagnetic down to T = 2 K with antiferromagnetic correlations and that the absorption onset depends on cation stoichiometry. This work provides an important path toward both the rapid expansion of the emerging family of nitride perovskites and understanding their potential multiferroic properties.

Abstract:

Recently, there has been an extensive focus on inverted perovskite solar cells (PSCs) with a p-i-n architecture due to their attractive advantages, such as exceptional stability, high efficiency, low cost, low-temperature processing, and compatibility with tandem architectures, leading to a surge in their development. Single-junction and perovskite-silicon tandem solar cells (TSCs) with an inverted architecture have achieved certified PCEs of 26.15% and 33.9% respectively, showing great promise for commercial applications. To expedite real-world applications, it is crucial to investigate the key challenges for further performance enhancement. We first introduce representative methods, such as composition engineering, additive engineering, solvent engineering, processing engineering, innovation of charge transporting layers, and interface engineering, for fabricating high-efficiency and stable inverted PSCs. We then delve into the reasons behind the excellent stability of inverted PSCs. Subsequently, we review recent advances in TSCs with inverted PSCs, including perovskite-Si TSCs, all-perovskite TSCs, and perovskite-organic TSCs. To achieve final commercial deployment, we present efforts related to scaling up, harvesting indoor light, economic assessment, and reducing environmental impacts. Lastly, we discuss the potential and challenges of inverted PSCs in the future.

Abstract:

The performance and scalability of perovskite solar cells (PSCs) based on 3D formamidinium lead triiodide (FAPbI3) absorber are often hindered by defects at the surface and grain boundaries of the perovskite. To address this, the study demonstrates the use of pyrrolidinium iodide for the in situ formation of an energetically aligned 1D pyrrolidinium lead triiodide (PyPbI3) capping layer over the 3D FAbI3 perovskite. The thermodynamically stable PyPbI3 perovskitoids, formed through cation exchange reactions, effectively reduce surface and grain boundary defects in the FAPbI3 perovskite. In addition to improved phase stability, the resulting 1D/3D perovskite film forms a cascade energy band alignment with the other functional layers in PSCs, enabling a barrier‐free interfacial charge transport. With a maximum power conversion efficiency (PCE) of ≈23.1% and ≈20.7% at active areas of 0.09 and 1.05 cm2, respectively, the 1D/3D PSCs demonstrate excellent performance and scalability. Leveraging this improved scalability, the study has successfully developed a mechanically‐scribed 1D/3D perovskite mini‐module with an unprecedentedly high PCE of ≈20.6% and a total power output of ≈270 mW at an active area of ≈13.0 cm2. The 1D/3D multi‐dimensional perovskite film developed herein holds great promise for producing low‐cost, high‐performance perovskite photovoltaics at both the cell and module levels.

Abstract:

This study explores the potential of copper-doped nickel oxide (Cu:NiO) as a hole transport layer (HTL) in flexible photovoltaic (PV) devices using a combined first-principles and finite element analysis approach. Density functional theory (DFT) calculations reveal that Cu doping introduces additional states in the valence band of NiO, leading to enhanced charge transport. Notably, Cu:NiO exhibits a direct band gap (reduced from 3.04 eV in NiO to 1.65 eV in the stable supercell structure), facilitating the efficient hole transfer from the active layer. Furthermore, the Fermi level shifts towards the valence band in Cu:NiO, promoting hole mobility. This translates to an improved photovoltaic performance, with Cu:NiO-based HTLs achieving ~18% and ~9% power conversion efficiencies (PCEs) in perovskite and poly 3-hexylthiophene: 1-3-methoxycarbonyl propyl-1-phenyl 6,6 C 61 butyric acid methyl ester (P3HT:PCBM) polymer solar cells, respectively. Finally, a finite element analysis demonstrates the potential of these composite HTLs with Poly 3,4-ethylene dioxythiophene)—polystyrene sulfonate (PEDOT:PSS) in flexible electronics design and the optimization of printing processes. Overall, this work highlights Cu:NiO as a promising candidate for high-performance and flexible organic–inorganic photovoltaic cells.